Understanding the effect of solvent vapor annealing on solution-processed A–D–A oligothiophene bulk-heterojunction solar cells: the role of alkyl side chains
Cordula D. Wessendorf,* Ana Perez-Rodriguez, Jonas Hanisch, Andreas P. Arndt, Ibrahim Ata, Gisela L. Schulz, Aina Quintilla, Peter Bäuerle, Uli Lemmer, Peter Wochner, Erik Ahlswedea and Esther Barrena*; J. Mater. Chem. A, 2016,4, 2571-2580; DOI: 10.1039/C5TA07713C
Solution-processed bulk heterojunction solar cells consisting of the previously developed dithienopyrrole containing A–D–A oligothiophenes (A = acceptor, D = donor unit) and [6,6]-phenyl-C71-butyric acid methyl ester (PC71BM) with power conversion efficiency up to 7.1% after solvent vapor annealing (SVA) are demonstrated. The influence of the position of the alkyl side chains attached to the thiophene units on the SVA, and the usage of either PC61BM or PC71BM as acceptor, is investigated in more detail by negative secondary ion mass spectrometry (SIMS), Kelvin probe force microscopy (KPFM), photoluminescence (PL), and grazing-incidence X-ray diffraction spectroscopy (GIWAXS). It was found that besides increased crystallinity and domain sizes, the active layers consisting of two different isomers which we will refer to in the following as isomer 1 or isomer 2 had different compositions after SVA treatment. In the former, a more or less homogeneously-mixed D:A blend was observed, whereas the latter showed a vertical gradient of PCBM in the active layer and much stronger phase segregation on the surface. These findings correlate well with the differences in solar cell performance of both isomers, before and after SVA.
- Hits: 5933